Singapore Recycles Just 4% of Its Plastic Waste. Can Chemical Recycling Change That?
We rinse our plastic bottles, sort our recyclables and place them in blue bins. But what happens when plastic waste is too contaminated, too degraded or too complicated to recycle? At Ocean Purpose Project, we are exploring how plastic conversion technologies could help tackle the waste that conventional recycling leaves behind.
Imagine collecting 100 kilograms of plastic waste in Singapore. Based on the latest National Environment Agency (NEA) statistics, only about 4 kilograms would be recycled. The remaining 96 kilograms would be disposed of.
In 2025, Singapore generated approximately 890,000 tonnes of plastic waste, of which just 34,000 tonnes were recycled. That leaves an astonishing 856,000 tonnes disposed of in the same year.
Most of us have been taught to do our part by separating recyclables, rinsing plastic bottles and placing them in blue recycling bins. More recently, Singapore's Beverage Container Return Scheme (BCRS) has introduced another way to encourage recycling through a 10-cent deposit on eligible beverage containers.
But here's a question we rarely ask: What happens after our plastic waste is collected?
The reality is that not all plastics are created equal. Some can be recycled relatively easily, while others are so contaminated, mixed or degraded that conventional recycling methods struggle to process them economically. This is where the distinction between mechanical and chemical recycling becomes important, and where alternative
technologies could play a role.

Left: Mechanical processing of plastic waste, right: chemical plant used for chemical recycling of plastics (Source: Herbold Meckesheim, PlasticsEurope)
Not All Plastic Is Recyclable. Here's Why.
Take a look at the plastics collected during a typical beach clean-up. You might find food wrappers, takeaway containers, Styrofoam fragments, plastic bottles, fishing-related materials and countless small pieces of weathered plastic. To the untrained eye, they might all look like plastic. But to a recycling facility, they represent very different challenges.
At Ocean Purpose Project (OPP), our community beach clean-ups along the shores of Pasir Ris offer a firsthand look at the diversity of plastic pollution entering our marine environment. After collecting and washing the plastics, our team often spends time explaining to volunteers why some of these materials cannot simply be placed into a recycling machine and turned into new products.

Some of the plastic waste collected at one of the OPP beach clean-ups, including contaminated, multilayer and weathered plastics.
Consider three common challenges:
Contaminated plastics: Food containers, takeaway packaging and marine debris can be coated with food residue, oil, grease, sand, salt and organic matter. These contaminants need to be removed before conventional mechanical recycling can take place. Cleaning them requires additional water, energy, labour and infrastructure.
Multilayer plastics: Many snack packets, sachets and flexible food wrappers are made from multiple layers of different materials, such as plastic films, adhesives and aluminium. These layers are designed to preserve food and extend shelf life, but separating them into individual materials for recycling is technically difficult and often uneconomical.
Weathered and degraded plastics: Plastics exposed to sunlight, seawater, waves and physical abrasion gradually break down. Their surfaces become brittle and fragmented, making collection and sorting more challenging. Some larger pieces eventually fragment into microplastics, creating an additional environmental concern. These examples highlight a fundamental problem: recycling depends not only on whether a material is technically recyclable, but also on whether it can be collected, sorted, cleaned and processed economically.
Mechanical Recycling: The Familiar Approach
Mechanical recycling is the process most people associate with recycling. It involves physically processing plastic waste into reusable material without fundamentally changing its chemical structure.
The typical process involves:
Collection and sorting: Plastics are collected and separated according to their resin types, colours and material properties.
Shredding: Plastics are broken into smaller flakes or pieces.
Cleaning: Labels, food residues, dirt and other contaminants are removed.
Melting and extrusion: The cleaned plastic is melted and processed into pellets.
Manufacturing: These pellets are used as raw materials to manufacture new products.
For example, relatively clean PET beverage bottles can be recycled into flakes and pellets for new packaging, textiles and other products.
Mechanical recycling remains an important part of the circular economy because it is an established method of recovering materials and, in suitable applications, can use less energy than chemical recycling.
However, it has limitations. Different plastics have different melting points and chemical compositions, meaning incompatible materials cannot simply be melted together. Contamination can compromise the quality of the recycled material, while repeated processing can cause polymer degradation.
As a result, recycled plastics may not always be suitable for their original applications. Instead, they are sometimes converted into lower-grade products such as plastic lumber, non-food-grade packaging or other items. This is commonly known as downcycling.
Mechanical recycling is therefore most effective when dealing with clean, well-sorted and compatible plastic waste streams. But what happens to everything else?
Chemical Recycling: Turning Difficult Plastics into New Resources
Unlike mechanical recycling, chemical recycling uses chemical or thermochemical processes to break plastics down into smaller molecules, chemical feedstocks or other useful products. One technology attracting attention is pyrolysis.
Pyrolysis involves heating suitable plastic waste at high temperatures in an oxygen-limited environment. Rather than simply melting the plastic, the process breaks down its long polymer chains into smaller hydrocarbon molecules, producing outputs such as liquid oil, gases and solid residues. Depending on the feedstock, technology and downstream processing, these outputs can potentially be refined into chemical feedstocks, fuels and other industrial materials. This offers an alternative route for certain plastic waste streams that are difficult to process mechanically, including some contaminated, mixed and multilayer plastics.
However, chemical recycling is not a magic solution. It requires specialised equipment, energy and investment. Its environmental performance depends on the types of plastics processed, energy sources, emissions management, conversion efficiency and the end use of its outputs.
It is also important to distinguish between chemical recycling that produces feedstocks for new materials and plastic-to-fuel conversion. Turning plastic into fuel can recover energy and value from waste, but burning that fuel releases carbon dioxide. It does not close the loop in the same way as producing new plastic materials. Both approaches therefore need to be evaluated carefully, based on their actual environmental outcomes rather than simply being labelled as recycling.
From Beach Waste to Useful Resources: What Is OPP Doing?
At Ocean Purpose Project, we believe that tackling plastic pollution requires more than collecting waste and raising awareness. We also need to explore innovative ways to manage materials that conventional recycling systems struggle to handle.
This is why OPP developed its Plastic-to-Fuel (PTF) initiative, which explores the use of modular thermochemical conversion technologies, including pyrolysis, to transform difficult-to-recycle plastic waste into useful resources.

Pictured: OPP's very own Plastic-to-Fuel unit
Our approach focuses on plastics recovered from marine and coastal environments, including materials that may be unsuitable for conventional mechanical recycling.
Through controlled thermochemical conversion, suitable plastic feedstocks can be broken down into smaller hydrocarbon molecules. OPP's PTF initiative explores the recovery of valuable outputs, including low-sulphur fuel, hydrogen and carbon-based materials such as carbon black and carbon nanotubes.
Why does this matter?
For coastal communities and maritime operators, plastic waste management can be particularly challenging. Waste collected from shorelines, vessels and marine environments may be mixed, contaminated or difficult to transport to conventional recycling facilities. Modular conversion technologies could offer another way to manage suitable waste closer to where it is generated or collected, potentially reducing some logistical barriers while recovering useful resources.
Importantly, OPP's work does not mean that every piece of plastic collected from the beach can be converted directly into fuel. Plastics still need to be assessed, sorted and prepared according to the technology's feedstock requirements. The process also needs appropriate emissions controls and environmental safeguards. Our goal is to explore how difficult-to-recycle plastics can be managed more effectively, while contributing to a broader circular economy that values resources rather than treating all waste as something to discard.
Want to learn more about how we are exploring this technology?
Discover OPP's Plastic-to-Fuel initiative and the work behind turning difficult-to-recycle marine plastics into valuable resources.

Infographic comparing the differences between mechanical and chemical recycling (Credit: Ocean Purpose Project)
So, Which Is Better: Mechanical or Chemical Recycling?
The answer is not necessarily one or the other.
Mechanical recycling remains a preferred option for clean, well-sorted plastics that can be efficiently processed into new materials. Chemical recycling and thermochemical conversion technologies may complement these methods by providing alternative pathways for selected waste streams that are difficult to recycle mechanically.
However, neither approach should become an excuse to continue producing and consuming unnecessary plastic. Singapore's low plastic recycling rate highlights the scale of the challenge. While better recycling infrastructure and innovative technologies are important, the most effective way to reduce plastic pollution is still to prevent unnecessary plastic waste from being created.
At OPP, we approach this challenge from both ends: working directly with communities through beach clean-ups and environmental education, while exploring technological solutions such as Plastic-to-Fuel to recover value from difficult-to-recycle waste. Because ultimately, solving plastic pollution is not just about finding better ways to process yesterday's waste. It is about rethinking the way we produce, consume and manage materials today.
The next time you place a plastic item into a recycling bin, ask yourself: could this actually be recycled? And if not, what happens next?
The future of plastic waste management depends on asking these questions – and being willing to explore better answers.



Comments